Shorelandr SLRB40TBXLW V.2 User Manual download pdf (Page 9)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003459

Page 9

Tire Size and Carrying Capacity Chart

Tire Size ....................... ST175/80R 13-C

GVWR .......................... 5440 lb.

Carrying Capacity ....... 4000 lb.

Axle .............................. Disc Brakes

Refer to the tire side wall for correct tire pressure.

ROCKER ARMS

Locate the rocker arms (Ref. No. 6 of Detail A in Dia-

gram D.

Note that the center bushing has a grease zerk in it.

Position the rocker arms up into the center channel

welded in the center of the tandem spring bracket so

that the grease zerk is pointing down. Align the holes

in the channel with the rocker arm. Secure in place

with a 3/4” x 4-1/2” hex bolt and lock nut. Tighten.

Repeat this process on the other rocker arm and

spring bracket. Grease the rocker at this time by ap-

plying grease through the zerk just discussed.

NOTE: The grease zerk is positioned down so that

it is accesible for servicing when needed.

SPRINGS

Position the axles so they are properly aligned with the

trailer. Position the brake axle so that the disc brake

calipers are on the back side of the axle. The brake

axle must always be mounted as the rear axle to give

you the best braking possible (See Diagram D). There

is no right and left to the axle without brakes. It can be

mounted either way.

Place the springs on the topside of the spring pads

welded to the axle. (See chassis diagram). Note that

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Shorelandr SLRB40TBXLW V.2 User Manual Page 9