Shorelandr LAV30BLW User Manual download pdf (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004432

Page 5

11/08/2011

Diagram C

WINCH POST INSTALLATION

The height that the bow eye is placed in your boat will determine

the length winch post required. Once this is determined, attach the

winch base to the tongue with three 1/2” x 4-1/2” carriage bolts and

lock nuts.

Align the holes in the Prole 2000 mounting channel with the holes

in the top of the winch base. Attach the front of the winch head

mounting channel to the base by placing a 1/2” x 4-1/2” hex bolt

through the hole closest to the front of the winch base. Secure with

a lock nut. Do not tighten.

Insert the two 1/2” and 1 1/4” carriage bolts into the holes just

aligned in the jack retainer plate and the winch base. Secure in

place with 1/2” lock washers and hex nuts. Tighten.

Once tightened, rotate the jack through its normal pivoting range to

make sure it is free to travel and is not binding up.

If jack pivots, place it on the tongue and secure in place with the

bolts and hardware provided with the trailer. Complete the assem-

bly of the winch head to the winch base. Assembly is complete.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Shorelandr LAV30BLW User Manual Page 5