Shorelandr SLB46TBBL V.1 User Manual download pdf (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003554

Page 3

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame, remove parts and sort

by size.

B-SERIES BUNK ASSEMBLY

(See Diagram A, Detail C)

Locate two of the bunk support pivots and place one on each end of

one of the bunk equalizer arms attached to the rear cross member.

Position so the concave in the bunk support pivot is downward as

shown in Detail C, then align the holes in the bunk support pivot

with those in the equalizer arm.

Locate one of the carpeted bunks. Note that one end of the bunk

has two galvanized plates with U-bolts extending below. Align the

legs of the U-bolts with the holes in the bunk support pivots, then in-

sert into the holes in the bunk support pivot and the equalizer arm.

Secure the U-bolt in place by sliding a spacer bushing on one leg

of the U-bolt, then a ½” ﬂat washer and ½” ﬂange lock nut. Repeat

on the other leg of the U-bolt. Repeat on the other U-bolt on the

opposite end of the equalizer arm. Tighten the nut until it is securely

against the spacer and ﬂat washer.

Place the front end of the bunk into the bunk bracket on the top

of the adjustable bunk bracket located on the front cross member.

Secure the bunk in the bracket using two No. 10 screws.

Repeat the above process on the bunk on the other side of the

trailer.

1 2 3 4 5 6 7 8 9 10

No comments

Shorelandr SLB46TBBL V.1 User Manual Page 3