Shorelandr LER46TCBBL User Manual download pdf (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003488

REV A 2/22/06

Page 6

SPARE TIRE BRACKET

The ﬁrst step in mounting the spare tire bracket is to determine the cor-

rect orientation of the trailer. Standing at the rear of the trailer and look-

ing forward, your right hand is the right-hand side of the trailer.

Mount the spare tire bracket on the right-hand side frame of your

trailer at a location somewhere between the very front of the frame

and the ﬁrst cross member. The exact positioning is dependant

upon the size and style of your boat.

Once identiﬁed, attach the spare tire bracket to the side frame using

the U-bolts provided in the kit. Note that the spare tire bracket is de-

signed to ﬁt both 2” x 4” and 2” x 5” side frames. Use the 1/2” x 4-9/16”

x 3-1/2” U-bolt when mounting to the 2” x 4” side frame and the 1/2”

x 5-9/16” x 3” U-bolts when mounting to the 2” x 5” side frame.

Place the U-bolts over the side frame in the desired location. Match

the holes in the spare tire bracket with the U-bolts just placed over

the side frame. Slide the spare tire bracket over the U-bolts. Secure

using 1/2” lockwashers and hex nuts. Tighten when desired loca-

tion is achieved.

The spare tire bracket is designed to ﬁt a 5 bolt on 4.5” bolt circle

pattern wheel. Note that there are only three stud bolts in the spare

tire bracket which are sufﬁcient to carry the tire and wheel assem-

bly. Align the three studs with the holes in the wheel assembly and

secure the wheel assembly to the spare tire bracket with three- 1/2”

tapered lug nuts provided in the kit. Tighten securely to make sure

the wheel assembly does not come loose and fall off while trans-

porting the trailer.

Installation is complete.

TA0028-_ _

1 2 3 4 5 6 7 8 9 10

No comments

Shorelandr LER46TCBBL User Manual Page 6