Shorelandr LAV46TCBB V.2 User Manual download pdf (Page 4)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004178

Page 4

Rev A 10/10/2011

WINCH POST ASSEMBLY

Your trailer may have come with the jack already installed on the

winch base. However, in the event that it did not, use the following

instructions to attach the jack to the winch base before it is installed

on the tongue.

WINCH POST INSTALLATION

The height that the bow eye is placed in your boat will determine

the length winch post required. Once this is determined, attach the

winch base to the tongue with three 1/2” x 4” carriage bolts and

lock nuts.

Align the holes in the Prole 2000 mounting channel with the holes

in the top of the winch base. Attach the front of the winch head

mounting channel to the base by placing a 1/2” x 4-1/2” hex bolt

through the hole closest to the front of the winch base. Secure with

a lock nut. Do not tighten.

Note that the winch head can now be rotated either up or down.

Identify the correct hole combination to use to position the bow eye

roller just above the bow eye of your boat. When determined, se-

cure in this position by placing the bushing as shown in Diagram D

inside the winch base so it aligns with the hole just identied for the

proper adjustment. Insert another 1/2” x 4-1/2” hex bolt through the

determined mounting hole in the mounting channel and winch base

making sure the bolt passes through the bushing as well. Secure

with a 1/2” lock nut. Tighten all bolts.

ASSEMBLY & MOUNTING INSTRUCTIONS

JACK - PROFILE 2000 WINCH BASE

The Prole 2000 winch base used on the 2” x 4” and 2” x 5” frame

trailers is formed so that the jack can be mounted directly to it elimi-

nating the need for other mounting hardware for attaching the jack

to the tongue. The jack required for mounting does not require the

Diagram B

1 2 3 4 5 6 7 8 9 ... 12 13

No comments

Shorelandr LAV46TCBB V.2 User Manual Page 4