Shorelandr SLR50TCBL User Manual download pdf (Page 4)

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004287

Page 4 of 14 11/01/2010

See Detail A in Diagram A. Secure the tongue cover

plate in position with the same 1/2” x 1-1/2” hex bolt

that secures the back on the tongue to the tongue

channel of the frame. Secure with 1/2” lock nut.

Tighten both bolts just installed.

Plug the tongue wire harness ends into the frame har-

nesses by matching colors and ends. Push the extra

wire provided into the rear of the tongue or remove the

grommet in the side frame and place the extra wire in

the side frame. Replace grommet just removed.

BRAKE LINE

Locate the brass brake line coupling. Remove the

plastic cap and thread the brake hose coming out the

rear of the tongue into one end of the coupling. Once

aligned, thread the side frame brake hose into the

other end of the coupling. Tighten both lines into the

coupling.

SAFETY CHAINS

Locate the 1/2” x 5” hex bolt. Slip the bolt through a 1/2” flat washer,

then place through the last link of one of the safety chain. Insert

through the hole in the actuator housing and out the other side. Slide

the last link of the other chain over the bolt and slide on a flat washer.

Secure with a 1/2” .flange lock nut. Tighten.

Assembly is complete.

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

Shorelandr SLR50TCBL User Manual Page 4