Shorelandr LEB22CLW V.2 User Manual download pdf (Page 9)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003282

REV B 2/07/06

Page 9

Tire Size and Carrying Capacity Chart

Tire Size ............................ST215/75R 14-C

GVWR ...............................2995 lb.

Carrying Capacity ..............2300 lb.

Axle ...................................Non-Brake

Refer to the tire side wall for correct tire pressure.

SPRINGS

Position the axle so it is properly aligned with the trailer. Place the

springs on the top side of the spring pads welded to the axle. (See

chassis diagram D). Note that the hook end of the spring must be

mounted to the rear of the trailer. Place a spring clamp on the top cen-

ter of the spring as shown. Next place the 1/2” x 6-1/2” U-bolts down

over the top of the spring clamp, spring and axle as shown.

Place the spring and axle U-bolt plate onto the ends of the two U-

bolts just placed. Secure in place with 1/2” lock nuts. Thread onto

the U-bolts but do not tighten securely until the complete unit is in

position on the trailer. Repeat on the other spring.

Recommended carrying capacity is based on shipping weight of

the trailer with standard equipment. Adding optional equipment may

decrease the trailer’s carrying capacity.

AXLE

Place one of the spring bracket bushings into the rear of

the spring bracket and secure with a 9/16” x 3-1/4” hex bolt

and hex lock nut. Repeat in other spring bracket.

Position the axle under the frame, then hook the hook loop of

the spring around the bushings just installed. Note that if the

axle is positioned too low when trying to hook, the hooks will

not hook around the bushings.

Raise the front of the springs up so they align with the front hole

of the spring bracket. Secure in place with 9/16” x 3-1/4” hex

bolts and lock nuts.

Tighten all axle U-bolts and spring bolts not tightened at this

time.

TIRE & WHEEL ASSEMBLY

Mount the tire and wheel assemblies using the 1/2” fine

threaded tapered lug nuts provided. Tighten to 80-90 ft./lb. of

torque using the rotation pattern as shown in the ShoreLandr’s

Owners Manual.

Re-torque the lug nuts after 50 miles of driving and then

periodically thereafter.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Shorelandr LEB22CLW V.2 User Manual Page 9

Comments to this Manuals

Related products and manuals for Trailers Shorelandr LEB22CLW V.2