Shorelandr B40TBLW User Manual download pdf (Page 10)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003449

Page 10 REV A 9/26/06

Hook the hook end of the springs mounted to the front

axle over the bushing just installed in the rocker arm

assembly. Swing the front of the spring up and attach

the front mounting hole in the spring bracket with an-

other 9/16” x 3-1/4” hex bolt and lock nut.

Tighten all axle U-bolts and spring bolts.

ONE AXLE BRAKE INSTALLATION

Cut the tape securing the brake line hose to the axle.

Remove the brass plug from the port in the brass

block on the right brake caliper. Thread in the brake

hose male end and tighten to either 6-8 ft. lb. or 72-96

in. lb. of torque.

DO NOT OVER TIGHTEN Over tightening will cause

the brass block to crack and then leak.

Place the other end of the hose up through the hole

provided in the brake line clip bracket. Secure in place

with the U-shaped hose clip provided.

Remove the plastic cap from the end of the frame

brake line coming out of the side frame by the axle.

Carefully uncoil the brake line so that it will reach the

end of the hose just attached to the brake line bracket.

Thread the brake line tting into the brake line hose.

Tighten.

NOTE: The axle has brake uid installed in the calipers

and the axle line when it is assembled at the factory.

This is done to protect the inner parts of the brake sys-

tem during shipping and storage. The complete brake

system including the axle MUST be re-bled to ensure

that all air has been removed from the brake system.

For bleeding instructions see the UFP brake bleeding

manual or the ShoreLand’r Disc Brake Manual.

Fill the actuator reservoir with brake uid and bleed

the line per the instructions in the Brake Manual.

TIRE & WHEEL ASSEMBLY

Mount the tire and wheel assemblies using the 1/2”

ne threaded tapered lug nuts provided. Tighten to 85-

95 ft./lb. torque using the rotation pattern as shown

in the ShoreLandr’s Owners Manual. Re-torque the

lug nuts after 50 miles driving and then periodically

thereafter.

1 2 ... 5 6 7 8 9 10 11 12

No comments

Shorelandr B40TBLW User Manual Page 10