Shorelandr TA1139 User Manual download pdf (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003340

TA1139 Pontoon Load Guide Kit

The TA1139 consists of a pair of upright load guides used

to center your pontoon on the trailer as it is being loaded. It

also assists when loading in windy conditions.

Installation Instructions

Break the bundle and sort all items by size. Position one of

the load guide assemblies on the top side of the rear cross

member of the trailer as shown. Note that the plastic portion

of the guide must be positioned so it is facing outward. At-

tach the load guide to the cross member using two- 3/8” x

2-7/16” x 4” U-bolts provided. Secure with 3/8” ﬂange lock

nuts.

Repeat the above process on the other load guide.

Adjustment

With the pontoon properly centered on the trailer slide the

load guides out until the are within ½” of the inside of the

pontoon tube. Tighten in position. This is a good starting

point for adjusting. This may need to be adjusted differently

depending on the splash guard on the front of the pontoon

tubes. Unload and reload the pontoon to make sure they are

adjusted to best ﬁt your pontoon. They can be repositioned

to best ﬁt your need. Adjustment is complete.

1 2

No comments

Shorelandr TA1139 User Manual Page 2