Shorelandr SRV46TBA V.1 User Manual download pdf (Page 9)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003244

Page 9 REV C 3/14/06

Dealer / Distributor:

Remove all parts banded or taped to the frame assembly.

Locate the bulk hardware and sort according to size.

Tongue:

Slide tongue into the tongue cap on the front of the trail-

er, align holes and insert ½” x 4” hex bolt through the

through tongue cap and secure with ½” ﬂange lock nut.

Pull wires from the rear of tongue and feed them thru the tongue

cover, slide the tongue cover over the brake line tube that ex-

tends from the rear of tongue. Align the hole in the tongue cov-

er, the tongue, and the frame cap insert a ½” x 1-½” hex bolt and

secure with a ½” ﬂat washer and a ½” ﬂange lock nut.

Plug harnesses from the tongue into the matching color har-

ness that extends from each side frame; slide the excess

wire back into the tongue. Very carefully form the brake lines

that extends from the tongue and right side frame until they

are aligned remove the plug and cap and screw the two to-

gether. Tighten line securely.

Safety Chains:

Take a ½” x 5” hex bolt slide on a ½” ﬂat washer and one

(1) of the safety chains; insert the bolt into the hole on the

actuator housing through tongue and out other side. Place

the second safety chain on the bolt followed with a ½” ﬂat

washer and secure with a ½” ﬂange lock nut.

Bunk Assembly:

Place the pre-assembled bunks on the preset bunk brackets

and secure with a 3/8” x 1” hex bolt and secure with a 3/8”

ﬂange lock nut. Repeat at each bunk bracket location.

Rockers:

Remove all parts from bag, insert the bushings into the hole

and slide the rocker into the center bracket on the spring

bracket, making sure that the grease zerk points toward the

ground, insert a ¾” x 4 ½” hex bolt from the outside in. Se-

cure with a ¾” lock nut. Repeat process on other side.

Springs/axles:

Mount springs on axle by aligning the stub bolt on the leaf

springs with the hole in the center of the spring pad on

the axle, place a spring clamp on top of the leaf spring.

Slide two (2) ½” x 2-5/16” x 6-½” square u-bolts over the

springs and spring clamp, slide a spring/axle u-bolt pad

over the threaded ends of the u-bolts and secure with ½”

ﬂange lock nuts. Repeat on other side of axle and on other

axle.

Place axle with the brakes to the rear of the trailer, slide a

spring bushing into the rear loop on the spring bracket and

insert a 9/16” x 3-¼” hex bolt from the outside in and secure

with a 9/16” lock nut. Repeat on other side of trailer. Slide

the hook end of the spring over the bushing and swing the

axle up so the hole in the front of the leaf spring aligns with

the rear hole in the rocker, insert 9/16” x 3-¼” hex bolt and

secure with 9/16” lock nut. Repeat on other side. To mount

the front non brake axle, insert a spring bushing into the front

of the rocker and align with the hole, insert a 9/16” x 3-¼”

hex bolt and secure with a 9/16” lock nut. Repeat on the oth-

er side. Swing axle into place so the front of the leaf spring

aligns with the hole in the front loop on the spring bracket

and insert a 9/16” x 3- ¼” hex bolt from the outside in and

secure with a 9/16” lock nut. Repeat on other side.

Remove plug from right side caliper and insert brake hose

assembly securely, place the other end of the hose into the

clip on the spring bracket and secure with the hose clip.

Carefully uncoil the brake line and insert into the hose.

Tire And Wheel Assemblies

Mount the tire and wheel assemblies using the 1/2” ﬁne

threaded tapered lug nuts provided. Tighten to 80-90 ft/lb.

of torque using the rotation pattern as shown in the Shore-

Landr’s Owners Manual. Re-torque the lug nuts after 50

miles of driving and then periodically thereafter.

Brakes:

Refer to the Brake Service Manual for brake bleeding proce-

dures, service and maintenance.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Shorelandr SRV46TBA V.1 User Manual Page 9

Comments to this Manuals

Related products and manuals for Trailers Shorelandr SRV46TBA V.1