Shorelandr SLV24LW User Manual download pdf (Page 6)

Place one of the spring bushings (Ref.#35) into the rear of

the spring bracket (Ref.#4) and secure with a 9/16 X 3-1/

4 hex bolt (Ref.#6) and 9/16 hex lock nut (Ref.#17).

Repeat on the other side. Position the axle (Ref.#3) under

the frame, then hook the spring loop around the bushing

just installed. Raise the axle assembly up so the front of

the springs (Ref.#31) line up with the front spring bracket

hole. Insert the other two (2) 9/16 X 3-1/4 hex bolts and

9/16 hex lock nuts. Tighten all nuts and bolts, but do not

over tighten. Allow the spring room enough to move.

Mount the tires and rim assemblies (Ref.#23) using 80-90

ft. lbs. tongue on lug nuts (Ref.#14) using proper tightening

procedures.

Tire Size & Carrying Capacity Chart

Tire Load Carrying

Size Range Capacity

ST185/80R13 C 1480 lbs. per/tire

Refer to the tire side wall for the correct tire pressure.

1 2 3 4 5 6 7 8

No comments

Shorelandr SLV24LW User Manual Page 6