Shorelandr SLV2314S V.2 User Manual download pdf (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003360

Page 5 REV A 6/13/05

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame, remove

parts and sort by size.

TONGUE

The tongue is shipped separate of the frame. Locate

the appropriate tongue and install by sliding it in the

front of the tongue channel.

Line the holes in the tongue with the holes in the

tongue channel. Install the 1/2” x 4” hex bolt in the front

cross hole and secure with a 1/2” lock nut.

Remove the wire harness from the rear of the

tongue. Place the wire harness and the brake

l i n e ( I f e q u i p p e d w i t h b r a k e s ) t h r o u g h

the hole provided in the tongue cover plate.

Secure the tongue cover plate in position with the same

1/2” x 1-1/2” hex bolt that secures the back on the

tongue to the tongue channel of the frame. Secure with

a 1/2” lock nut. Tighten both bolts just installed.

Plug the tongue wire harness ends into the frame

harnesses by matching colors and ends. Push the

extra wire provided either into the rear of the tongue

or else remove the grommet in the side frame and

place the extra wire in the side frame. Replace

grommet just removed.

SAFETY CHAINS

Locate the 1/2” x 5” hex bolt. Slip the bolt through a

1 / 2 ” f l a t w a s h e r, th e n pl a c e t h r o u g h th e

last link of one of the safety chains.

Place the bolt with chain attached through the hole

provided in the bottom front of the actuator mount on

the tongue. Place the second chain on the portion of

the bolt extending through the other side of the tongue.

Place on another 1/2” ﬂat washer and hex lock nut.

Tighten.

1 2 3 4 5 6 7 8 9 10

No comments

Shorelandr SLV2314S V.2 User Manual Page 5