Shorelandr SLRB46TBBL V.2 User Manual download pdf (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003566

Page 12 REV A 10/27/06

RB SERIES

The RB bunk system comes pre-assembled from the factory. Break

the bundle and center one of the RB bunk systems on the rear

pivot cross member of the frame. Locate two ½” x 3 9/16” x 3 7/8”

U-bolts. Slide a U-bolt up around the rear pivot cross member, align

the legs of the U-bolt with the holes in the mounting plate of the RB

bunk support tube. Insert the U-bolt through the holes and secure

with ½” ange lock nuts. Repeat on the second U-bolt. Tighten the

lock nuts only enough to hold in position. They will have to be re-

adjusted when the boat is placed on the trailer.

The short stabilizer bunk is installed to the adjustable bunk bracket

on the front cross member with a 3/8” x 1” hex bolt and lock nut.

(See Diagram A, Detail B.)

Repeat the above process on the bunk on the other side of the

trailer.

1 2 ... 7 8 9 10 11 12 13 14

No comments

Shorelandr SLRB46TBBL V.2 User Manual Page 12