Shorelandr SLR30BSW V.1 User Manual download pdf (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003428

Page 3 REV A 10/04/06

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame, remove parts

and sort by size.

Refer to your ShoreLand’r Owner’s

Guide and other decals on trailer for

additional information.

SAFETY INSTRUCTIONS

4810709

Proper tongue weight must be maintained.

Rev C 8/28/06

Before towing, check the following to ensure

that:

1. All parts, bolts, nuts and wheel lug

nuts are tight.

2. All wheel lug nuts must be tightened

to a minimum torque rating of 85 ft/lb.

3. Lug nuts must be re-torqued after the

first 50 miles, then periodically there

after.

4. Tires are inflated to manufacturer’s

standards. (See tire sidewall)

5. Wheel bearings have adequate

grease.

6. Hitch ball is the proper diameter and

has a rating equal to or greater than

the GVWR of the trailer.

7. Coupler is properly attached and

secured to coupler ball.

8. Trailer safety chains are crossed

under the tongue and attached to

towing vehicle.

9. All lights are operational. Note: It is

recommended that the trailer lights

be disconnected before backing into

the water.

10. Tie downs, winch strap and bow-

eye safety chain are secure.

11. Trailer tongue jack is in up or travel

position.

1 2 3 4 5 6 7 8 ... 11 12

No comments

Shorelandr SLR30BSW V.1 User Manual Page 3