Shorelandr SLIB29B User Manual download pdf (Page 4)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003800

Page 4 05/01/07

Diagram B

TONGUE

Locate the tongue and install by sliding it in the front of the tongue

channel.

Line the holes in the tongue with the holes in the tongue channel.

Install the 1/2” x 4” hex bolt in the front cross hole and secure with

a 1/2” ange lock nut.

Remove the wire harness from the rear of the tongue. Place the

wire harness and the brake hose through the hole provided in the

tongue cover plate.

Secure the tongue cover plate in position with the same 1/2” x 1-

1/2” hex bolt that secures the back on the tongue to the tongue

channel of the frame. Secure with a 1/2” lock nut. Tighten both bolts

just installed.

Plug the tongue wire harness ends into the frame harnesses by

matching colors and ends. Push the extra wire provided into the

rear of the tongue. The wire should be positioned so the only thing

exposed to the outside of the tongue and side frame is the black

wire loom.

TONGUE BRAKE HOSE CONNECTION

Locate the brass brake line coupling. Remove the plastic cap from

the tting on the end of the tongue hose. Thread into one end of the

coupling. Remove the hose from the side frame enough to reach

into the rear of the tongue. Remove the plastic cap from the tting

on the side frame hose, then thread into the other end of the cou-

pling. Tighten.

Push the excess hose back inside the tongue so that the coupling

just installed is located inside the rear of the tongue.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Shorelandr SLIB29B User Manual Page 4