Shorelandr SL82TAL User Manual download pdf (Page 10)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003356

REV G 4/28/06

Page 10

Mount the rear bunk support weldments to the pivot weldments by placing them in the channel of the pivot

weldments and attaching with 1/2” x 4-1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. Place

the bunk assembly over the support weldment, align the holes of the bunk brackets with the holes in the

support weldment and secure using 1/2” x 1 1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. Tighten but do

not over tighten because the bunks must rotate to conform to the boat bottom.

Note: The bunk pivot base weldment is adjustable on the front cross. Loosen the 1/2” U-bolts (Item #3,

Page 14) enough to move the bunk pivot base weldment in or out on the front cross to a location that best

conforms to your watercraft.

Rear Bunk Assembly:

Rear Bunk Assembly

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Shorelandr SL82TAL User Manual Page 10