Shorelandr LUV40TBXLW V.3 User Manual download pdf (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003671

Page 12 REV C 12/17/2007

EQUILOAD DOUBLE BUNK ASSEMBLY

Locate the carpeted bunks. Lay two of them upside down on the

oor so they are spaced approximately 3 ½” apart. Remove the

nuts and lock washers from the bolts that are in the bunks.

Locate two of the double bunk brackets. Position them upside down

so that the holes in the double bunk brackets align with the bolts

from which the nuts were just removed. Drop into position and se-

cure with the lock washers and hex nuts just removed. Tighten but

do not over tighten because they may have to be adjusted to t the

trailer cross members.

Turn the bunk assembly upright and place on the trailer so that the

double bunk brackets drop down around the cross members so

one leg of the brackets is on each side of the cross member. Align

the proper hole in the double bunk brackets with the correct hole

in the cross members. Insert a 3/8” x 3 ¾” hex bolt into the aligned

holes. Secure with a 3/8” ange lock nut. Tighten. Tighten the nuts

left slightly loose when assembling the bunks.

Repeat the above process on the bunks for the other side of the

trailer.

1 2 ... 7 8 9 10 11 12 13 14

No comments

Shorelandr LUV40TBXLW V.3 User Manual Page 12