Shorelandr LUV2314SW V.2 User Manual download pdf (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003808

Page 3 06/05/07

LUV2314SW (All Colors) Specications:

Capacity: 2300 lbs.

GVWR: 2995 lbs.

GAWR: 2995 lbs.

Ship Wt: 575 lbs.

Frm Size: 2X4 (11 Ga)

Tire Size: ST215/75R14-C

Rim Size: 14 X 6 “J”

Brake: N/A

Coupler: 2”

Safety Chn: 7600 lb.

Suspension: 5 Leaf Hook Springs

Tongue Size: 3 X 5 X 65” Swing Tongue

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame, remove parts and sort

by size. Remove all the banded items from the frame.

TONGUE

Install the swing tongue by sliding it in the front of the tongue chan-

nel. Line the holes in the tongue with the holes in the tongue chan-

nel. Install the 1/2” x 4” hex bolt in the front cross hole and secure

with a 1/2” lock nut.

Remove the wire harness from the rear of the tongue. Place it

through the hole provided in the tongue cover plate.

Secure the tongue cover plate in position with the same 1/2” x 1-

1/2” hex bolt that secures the back of the tongue to the tongue

channel of the frame. Secure with a 1/2” lock nut. Tighten both bolts

just installed.

Plug the tongue wire harness into the frame harnesses by match-

ing colors and ends. Push the extra wire provided either into the

rear of the tongue or else remove the grommets in the side frame

and place the extra wire in the side frame. Replace grommets just

removed.

SAFETY CHAINS

Locate a 3/8” x1 1/4” hex bolt. Slip the bolt through a 3/8” at wash-

er, then place through the last link of one of the safety chains.

Place the bolt with chain attached through the hole provided in the

bottom front of the tongue. Secure with a 3/8” ange lock nut. Tight-

en. Repeat on the other side and safety chain.

RETRACTABLE TIE DOWNS

Locate the two retractable tie downs. Next locate one of the 7/16”

x 1 ½” ne threaded bolts supplied with the retractable tie down.

Insert it into the bottom hole on the retractable tie down so the bolt

is pointing through the back side of the tie down. Insert the bolt

through the hole provided in the taillight bracket just inside the side

frame. Secure with the 7/16” ange lock nut. Tighten.

Repeat the above process on the other tie down.

WINCH POST ASSEMBLY

Your trailer may have come with the jack already installed on the

winch base. However, in the event that it did not, use the following

instructions to attach the jack to the winch base before it is installed

on the tongue.

ASSEMBLY AND MOUNTING INSTRUCTIONS:

JACK ON A PROFILE 2000 WINCH BASE

The Prole 2000 winch base used on the 2” x 4” and 2” x 5” frame

trailers is formed so that the jack can be mounted directly to it elimi-

nating the need for other mounting hardware for attaching the jack

to the tongue. The jack required for mounting does not require the

mounting base or any of the original mounting hardware compo-

nents.

Assemble as follows:

The jack must be mounted to the winch base before it is installed

on the trailer tongue. If the winch base is already mounted on the

tongue, it will have to be removed for the jack installation.

Locate the hardware bag and sort all items by size.

Lay the Prole 2000 winch base on its side so the side that the jack

ITEM PART # DESCRIPTION QTY

NOTE

1 61395 COUPLER BAG WITH CHAINS 1

2 66494 PROFILE 2000 WINCH CASE ASSY 1

3 68271 TONGUE COVER PLATE 1

4 69268 FRAME WMENT 2X4X80W 190 LUND 1

5 69308 SWINGTONGUE ASSY 55IN NON BRAKE FG 1

6 69337 BUNK ASSY BUNDLE LUB29CBLW 2

7 0110059 HH 3/8-16 X 3 3/4 CS GR5 4

8 0110114 HH 1/2-13 X 4 CS GR5 1

9 0140094 HH 1/2-13 X 1 1/2 CS GR5 1

10 0210130 CARR 3/8-16 X 3 3/4 GR5 2

11 0210218 CARR 1/2-13 X 4 GR5 3

12 0810965 SCREW #10 X 1 1/2 SQ PAN SELF DRILL 2

13 1340030 LOCKWASHER 3/8 S/T MED ULTRASEAL 2

14 1340095 WASHER USS FLAT 3/8 2

15 1410109 HEX NUT 3/8-16 2

16 1440101 HEX LOCKNUT FLANGE 3/8-16 W/T&T 4

17 1440102 HEX LOCKNUT FLANGE 1/2-13 W/T&T 5

18 2400026 TIE DOWN RETRACTABLE 2

19 3510022 GROMMET 7/16IN MOLDED 1

20 3510030 GROMMET 7/8IN MOLDED 8

21 3510158 PLASTIC DRIVE RIVOT 4

22 3510253 LIGHT BEZEL - AMBER 2

23 3510368 TAILLIGHT STEP PAD TREAD TAPE 2

24 3510542 MOLDED REAR CROSSMEMBER PAD 2

25 3510597 GROMMET 13/16IN WITH SPLIT 9/16ID 2

- 4850414 DECAL LUND LARGE CHROME 2

- 4850417 DECAL LUND CHROME WING LARGE LEFT 1

- 4850418 DECAL LUND CHROME WING LARGE RIGHT 1

26 5110127 REFLECTOR ANDERSON AMBER 2

27 5110348 BO LICENSE PLATE BRACKET 1

- 5110561 HARNESS TONGUE 5WIRE FULL GROUND 1

- 5110565 HARNESS FRAME 214" FULL GROUND RT 1

- 5110566 HARNESS FRAME 214" FULL GROUND LT 1

28 5110569 TAILLIGHT RIGHT LED PETERSON 1

29 5110570 TAILLIGHT LEFT LED PETERSON 1

30 5110571 LIGHT CLUSTER THREE LED 1

31 5110572 MARINE YELLOW CLEARANCE LIGHT 2

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Shorelandr LUV2314SW V.2 User Manual Page 3

Comments to this Manuals

Related products and manuals for Trailers Shorelandr LUV2314SW V.2