Shorelandr LUB14TM V.1 User Manual download pdf (Page 4)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003663

Page 4

REV B 07/28/2011

Diagram B

and insert a 3/8” x 4” hex bolt. Secure with a 3/8” ange lock nut.

Place a second 3/8” x 4” hex bolt down through the hole in the rear

of the tongue and the front cross member. Place on a 3/8” ange

lock nut. Tighten.

Connect the tongue wire harness into the side frame harness of

the trailer by matching plugs. Attach the white ground wire of the

tongue harness to the frame using a No. 10 x 3/4” self-tapping

screw provided so that a good ground connection is made between

the frame of the trailer and the tow vehicle. Push all extra wires

used to make the connection back inside either the side frames of

the trailer or else into the tongue. Place a second rubber grommet

into the hole where the wires exit the tongue to protect them from

damage during normal use.

1 2 3 4 5 6 7 8

No comments

Shorelandr LUB14TM V.1 User Manual Page 4