Shorelandr LEB29CBLW V.2 User Manual download pdf (Page 4)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003284

REV B 2/07/06

Page 4

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame. Remove the parts and

sort by size.

TONGUE

The tongue is shipped separate of the frame. Locate the appropri-

ate tongue and install by sliding it in the front of the tongue chan-

nel.

Line the holes in the tongue with the holes in the tongue channel.

Install the 1/2” x 4” hex bolt in the front cross hole and secure with

a 1/2” lock nut.

Remove the wire harness from the rear of the tongue. Place the

wire harness and the brake line through the hole provided in the

tongue cover plate.

Secure the tongue cover plate in position with the same 1/2” x 1-

1/2” hex bolt that secures the back on the tongue to the tongue

channel of the frame. Secure with a 1/2” lock nut. Tighten both bolts

just installed.

Plug the tongue wire harness ends into the frame harnesses by

matching colors and ends. Push the extra wire provided either into

the rear of the tongue or else remove the grommet in the side frame

and place the extra wire in the side frame. Replace grommet just

removed.

Locate the brass brake line coupling. Remove the plastic cap and

thread the brake line coming out the rear of the tongue into one

end of the coupling. Bend the line in a smooth gradual radius being

careful not to kink the line. Bend so it can be mated to the brake

line from the side frame. Once aligned, thread the side frame brake

line into the other end of the coupling. Tighten both lines into the

coupling.

SAFETY CHAINS

Locate the 1/2” x 5” hex bolt. Slip the bolt through a 1/2” ﬂat washer,

then place through the last link of one of the safety chains.

Place the bolt with chain attached through the hole provided in the

bottom front of the actuator mount on the tongue. Place the second

chain on the portion of the bolt extending through the other side

of the tongue. Place on another 1/2” ﬂat washer and hex lock nut.

Tighten.

Diagram B

1 2 3 4 5 6 7 8 9 10

No comments

Shorelandr LEB29CBLW V.2 User Manual Page 4