Shorelandr LAV46TBB V.1 User Manual download pdf (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004177

Page 6

Rev A 10/11/2011

Diagram D

mounting base or any of the original mounting hardware compo-

nents.

Assemble as follows:

The jack must be mounted to the winch base before it is installed

on the trailer tongue. If the winch base is already mounted on the

tongue, it will have to be removed for the jack installation.

Locate the hardware bag and sort all items by size.

Lay the Prole 2000 winch base on its side so the side that the jack

is going to be mounted on is up.

Place the inside jack spacer on the winch base so the center pro-

trusion ts down into the indent in the winch base.

Position the jack mounting plate so it is centered around the inside

jack spacer just positioned.

Lay the jack retainer plate on top of the jack mounting plate aligning

the holes in it with the holes in the winch base.

Insert the two ½” and 1 ¼” carriage bolts into the holes just aligned

in the jack retainer plate and the winch base. Secure in place with

½” lock washers and hex nuts. Tighten.

Once tightened, rotate the jack through its normal pivoting range to

make sure it is free to travel and is not binding up.

If jack pivots, place it on the tongue and secure in place with the

bolts and hardware provided with the trailer. Complete the assem-

bly of the winch head to the winch base. Assembly is complete.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Shorelandr LAV46TBB V.1 User Manual Page 6